Product description:   Using analog inputs as digital inputs allows multiple (or all) analog inputs to be configured as digital inputs. In doing so, they evaluated the input voltage higher than ca+ 7 V as signal 1. In this input impedance operation mode, it is about 4 kW. Terminal M is the reference potential. The input signal delay is 7 ms. It cannot be configured. The input is not electrically isolated. They may be shorted to AGND. Unused inputs must be configured as Unused. The relationship between the analog input signal and the converted digital is shown in the figure below. Make sure that the high speed counter is not configured for operating mode 1 or 2 (see also chapter "High speed counter"). Characteristics of analog input: 8 analog inputs are not electrically isolated. Resolution 12 bits of A/D converter. Analog signals are conducted in shielded cables (see Analog inputs can be individually configured in ma...

ABB controller Both Compact Control Builder and 800A control builder can be used to configure AC800M. With Compact Control Builder configuration, AC800M can be used in all control solutions. With 800XA Control Builder configuration, AC800M becomes a part of tight integration on 800XA DCS and can be used as an attachment of 800xA system.   AC 800M CPU module Various CPU modules can provide different functions, processing capacity, memory and redundancy support. Each CPU module is equipped with one or more Ethernet ports to exchange data with different controllers or interact with operators, engineers, managers and higher level applications. When availability becomes the most important, these Ethernet ports can be configured as redundant. Each CPU module is also equipped with two RS-232C ports, which can exchange point-to-point data with programming/debugging tools or third-party systems and devices.   Com and I/O module For each CPU module, multiple communication and...

G7L Power Relay Omron's high-capacity, high-dielectric-strength relay is compatible with momentary voltage drops   Omron's G7L power relay is a miniature-sized relay for maximum switching power, particularly for inductive loads. ltoffers a wide range of AC-activated coils that handle 100 Vac to 120 VAc or 200 VAc to 240 Vac at either 50 Hz or60 Hz. No contact chattering occurs for momentary voltage drops up to 50% of rated voltage.     Overview -SPST-NO or DPST-NO contact types -Quick connect, PCB or screw terminals -20, 25 or 30A rated load,  3HP, 277VAC -Compatible with momentary voltage drops -Wide range of applications with 100 or 200V coils   Specifications Max. switching voltage: 250VAC Minimum Load: 100 mA@5 VDC Operating temperature: -25 to 60°C   More Products In Stock: G7L-1A-B-CB AC12 G7L-1A-BUBJ-CB DC100 G7L-1A-BUBJ-CB DC100 G7L-1A-T-CB-DC6 G7L-1A-TJ-CB DC48 G7L-1A-TUB-CB-AC24 G7L-1A-TUB-CB-AC50 G7L-1A-TUB-CB-DC24 G7L-1A-TUB-...