Both Compact Control Builder and 800A control builder can be used to configure AC800M.
With Compact Control Builder configuration, AC800M can be used in all control solutions.
With 800XA Control Builder configuration, AC800M becomes a part of tight integration on 800XA DCS and can be used as an attachment of 800xA system.
AC 800M
CPU module
Various CPU modules can provide different functions, processing capacity, memory and redundancy support. Each CPU module is equipped with one or more Ethernet ports to exchange data with different controllers or interact with operators, engineers, managers and higher level applications. When availability becomes the most important, these Ethernet ports can be configured as redundant. Each CPU module is also equipped with two RS-232C ports, which can exchange point-to-point data with programming/debugging tools or third-party systems and devices.
Com and I/O module
For each CPU module, multiple communication and I/O modules can be added, such as:
·Additional RS-232C ports
·PROFIBUS DPDP - V1 interface
·ABB INSUM interface
·MasterBus 300 bus interface
·S100 interface
·S800L and S800 modules
ABB has integrated, discrete and modular I/O systems. The I/O system communicates with the main controller through the industrial standardized field bus
Due to the diversity of connections, our I/O system is suitable for ABB and other suppliers' controllers. Because it can be installed on site and close to sensors and actuators, our I/O modules reduce installation costs by reducing cable expenses.
With online reconfiguration and redundancy options, they extend uptime and thus ensure continued profit growth. The modular I/O system is highly adaptable and we can fully realize the optimal configuration of functions and assemblies.
S800 I/ O
S800 I/O is a comprehensive discrete and modular I/O system, which communicates with the main controller through the industrial standard field bus. Due to the diversity of interfaces, it is applicable to various controllers of ABB and other systems.
Because it can be installed on site and close to the sensor and actuator, the S800 I/O system reduces the installation cost by reducing the cable expenditure. And because of the following characteristics, such as "hot plug modules", "online reset and redundancy options, they ensure production and make profits continue to grow.
S800L I/ O
Low cost design and only 59mm deep installation make the S800L I/O module the best choice for PLC applications.
Rugged appearance, integrated operation, simple installation and intelligent connection can reduce your time in all installation stages.
Because all required information is pre installed in Compact Control Builder_ Therefore, the configuration of S800L I/O and AC 800M becomes extremely simple. In addition, through GSD files, the S800L I/O can be used in any control system.
In addition, because S800L I/O is a sub device of S800 I/O system with 8 million points in the world, you can enjoy the full function signal interface and high availability.
AC800M controller unit
PM851K01 8M RAM PM851K01 3BSE018168R1
PM856K01 RAM PM856K01 3BSE0181048R1
PM860K01 8M RAM PM860K01 3BSE018100R1
PM861AK01 16M RAM PM861AK01 3BSE018157R1
PM861AK02(Redundant controller)16MRAM PM861AK02 3BSE018160R1
PM864AK01 32M RAM PM864AK01 3BSE018161R1
PM864AK02(Redundant controller)32MRAM 3BSE018164R1
PM866K01(CPU) 3BSE050198R1
PM864AK02 3BSE018164R1
PM866K01 3BSE050198R1
PM866K02(CPU) 3BSE050199R1
PM866K02 3BSE050199R1
SB821 3BSE018109R1
SB822 3BSE018172R1
AC800M High Intergrity Units
PM865K01 32M RAM PM865K01 3BSE031151R1
PM865K02(Redundant controller)32MRAM PM865K02 3BSE031150R1
SM810K01 Safety CPU Module Kit SM810K01 3BSE030928R1
SS823 3BSE038226R1
Communication equipment
C853K01 3BSE018103R1
C854AK01 3BSE030220R1
C860K01 3BSE032444R1
C855K01 3BSE018106R1
C856K01 3BSE026055R1
C862K01 3BUA000037R1
C865K01 3BSE040795R1
C857K01 3BSE018144R1
C858K01 3BSE018135R1